advanced video viewer separate algorithm, schedule timer snap, channel control, and sound.
with any 2.4GHz cameras within range, PAL or NTSC. There is no complicated setup, motion detection (with sensitivity adjust) and alarm. Out for remote monitoring and AV in if you wish to use it with an existing AV camera setup instead of a wireless solution.
DVR Features:
Send E-Mails attachment with image
USB 2.0 output to PC and AV output to TV/Monitor
Save image on Hard Disk
Sound Alarm
Video signal filter, for filtrate Active and Invalid channel
Signal lost alarm
Motion Detection
Adjustable sensitivity
Automatically lock to prevent unauthorized operation
Schedule Monitoring secessions, for timer snap
Record video/audio (with USB 2.0 Audio Interface), snapshot
Automatic Space Management. Stop recorder or capture still automatically on disk full
Support 4 Channel Video input on one computer
Support on-screen display. Display’s date and time, or channels description on video
Supports manual open/close Invalid channel, or add/delete channel description
Supports logoin and logout, by User name and password
Support running background stealthy
Capture the picture on motion detection.It can email you with picture attached or output alarm
Display 4 Cameras at the same time, no need to switch between cameras (also does have a rotational feature if desired using the remote control)
System Requirements:
Receiving Frequency: 4 Channels: 2.414GHz, 2.432GHz, 2.450GHz, 2.468GHz
Intermediate Frequency: 480Mhz
Frequency Stabilization: +/-100Khz
Demodulation Mode: FM
Receiving Sensitivity: <-85dBm
Antenna: 50ohm SMA
Range :Up to 100m in open space.
Power Source: Wall Outlet
Channels Available: 4 wireless OR 1 AV In
Channel Scan and Channel Skip for multiple Cameras
Interface: USB 2.0 and AV OUT/IN
Software-Minimum System Requirements:
Microsoft Windows XP
512MB Ram
80GB HDD
Microsoft DirectX 9.0c
USB 2.0
Display of 1024 * 768
Sound card
Wireless 4 Video Camera USB IR CCTV Home Security DVR System Remote TV/PC Surveillance Kit